Highly Enantioselective Direct Asymmetric Aldol Reaction Catalyzed by 4,5‐Methano‐L‐proline

The 4,5‐methano‐L‐proline was used as chiral organocatalysts in direct asymmetric aldol reactions. Under the optimal conditions, excellent enantioselectivities (up to 99% ee) were obtained with high chemical yields (up to 95%) for a series of aldehydes using only 5 mol% catalyst loading. To show the practicality of the method, the reaction was tested at a large scale. The reaction was complete in 16 h, and the aldol product was obtained in 86% yield and 93% ee.     

Combination of Solid‐Phase Micro‐Extraction and Direct Analysis in Real Time‐Fourier Transform Ion Cyclotron Resonance Mass Spectrometry for Sensitive and Rapid Analysis of 15 Phthalate Plasticizers in Beverages

A method for rapid identification and quantification of phthalate plasticizers in beverages was developed. A number of 15 phthalate plasticizers which covered all the phthalates concerned in the US Consumer Product Safety Improvement Act (CPSIA), European Union legislations and Chinese national standards (GB) were analyzed. By a combined solid‐phase micro‐extraction (SPME) and direct analysis in real time mass spectrometry (DART‐MS) approach, phthalates at sub‐ng·mL^?1 levels can be qualitatively and quantitatively analyzed in a short time. The use of ultrahigh‐resolving power and the accurate mass measurement capacity naturally provided by Fourier transform ion cyclotron resonance mass spectrometry (FT‐ICR‐MS) minimizes the matrix interferences and thus enables the evaluation of phthalates in a complex matrix without extensive sample handlings or preparations. The limits of quantification (LOQs) were estimated to be at 0.3–5.0 ng·mL^?1, lower than the Maximum Residue Limit (MRL) regulated by the European Union legislations (2007/19/EC) in foods, beverages, food packaging and toys (0.3–30 ng·mL^?1). This rapid and easy‐to‐use SPME‐DART‐FT‐ICR‐MS method provided a relatively high‐throughput and powerful analytical approach for quick testing and screening phthalates in beverages and water samples to ensure food safety.     

三维有序结构的金掺杂纳米TiO_2修饰电极用于H_2O_2的测定

在ITO玻璃表面构建了三维有序多孔结构的金掺杂纳米Ti O2薄膜(3DOM GTD/ITO),同时制备了一种细胞色素c(Cyt c)酶生物传感器(Cyt c/3DOM GTD/ITO)。通过透射电镜(TEM)、扫描电镜(SEM)对修饰电极进行表征。紫外-可见光谱实验表明吸附在GTD上的Cyt c能够保持其生物活性,二级结构未被破坏。同时研究了Cyt c在3DOM GTD/ITO修饰电极表面的直接电化学及对H2O2的电催化行为。结果显示,Cyt c在3DOM GTD/ITO修饰电极上有显著的直接电化学响应,峰电流与扫描速度呈线性关系,说明该电极过程是表面电化学控制过程。Cyt c/3DOM GTD/ITO修饰电极对H2O2具有良好的催化性能,线性范围为3.0×10-7~1.70×10-5mol/L,检出限为3.6×10-8mol/L(S/N=3),响应时间为5 s,且该修饰电极具有较好的重现性和稳定性。     

Preparation and thermal characterization of poly(2‐vinylpyridine) copolymers coordinated to Cr nanoparticles

In this study, polystyrene‐block‐poly(2‐vinylpyridine), PS‐b‐P2VP, polyisoprene‐block‐poly(2‐vinylpyridne), PI‐b‐P2VP and poly(methyl metacrylate)‐block‐poly(2‐vinylpyridine), PMMA‐b‐P2VP, coordinated to Cr metal were synthesized and characterized by Fourier transform infrared, transmission electron microscopy and direct pyrolysis mass spectrometry techniques. Both thermal degradation mechanism and thermal stability of P2VP blocks were affected by the coordination of Cr nanoparticles to nitrogen of pyridine rings. Thermal decomposition of P2VP blocks was started by loss of pyridine units leaving an unsaturated and/or crosslinked polymer backbone that degraded at relatively high temperatures. Incorporation of Cr metal did not noticeably influence thermal behavior of PS and PI blocks. However, increase in thermal stability of PMMA block was detected and associated with inhibition of the interactions between carbonyl groups of MMA chains with nitrogen atom of pyridine ring as a consequence of coordination to metal. Copyright © 2015 John Wiley & Sons, Ltd.     

Direct chemical profiling of olive (Olea europaea) fruit epicuticular waxes by direct electrospray‐ultrahigh resolution mass spectrometry

In the present paper, an electrospray ionization (ESI)‐Orbitrap method is proposed for the direct chemical profiling of epicuticular wax (EW) from Olea europaea fruit. It constitutes a rapid and efficient tool suitable for a wide‐ranging screening of a large number of samples. In a few minutes, the method provides a comprehensive characterization of total EW extracts, based on the molecular formula of their components. Accurate mass measurements are obtained by ultrahigh resolution mass spectrometry, and compositional restrictions are set on the basis of the information available from previous studies of olive EW. By alternating positive and negative ESI modes within the same analysis, complementary results are obtained and a wide range of chemical species is covered. This provides a detailed compositional overview that otherwise would only be available by applying multiple analytical techniques. Copyright © 2015 John Wiley & Sons, Ltd.     

Numerical simulation of boundary-layer transition at Mach two

The linear and early nonlinear stages of boundary-layer transition at free-stream Mach numberM ==2.0 are investigated by direct numerical simulation of the compressible Navier-Stokes equations. Results from simulations with a large computational box and small-amplitude random initial conditions are compared with linear stability theory. The growth rates of oblique waves are reproduced correctly. Two-dimensional waves show a growth that is modulated in time, indicating the presence of an extra unstable mode which moves supersonically relative to the free stream. Further simulations are conducted to investigate the nonlinear development of two- and three-dimensional disturbances The transition due to oblique disturbance waves is the most likely cause of transition at this Mach number, and is found to lead to the development of strong streamwise vortices.     

Phase structure change and ER effect in liquid crystalline polymer/dimethylsiloxane blends

The mechanism of the electrorheological (ER) effect in two types of liquid crystalline polymer (LCP)/dimethylsiloxane (DMS) blends was investigated by rheological measurements and by structure observation under electric field and shear flow. The results show that the phase structures of these immiscible blends can be categorized into slipping (low viscosity) and non-slipping (high viscosity) states. In the non-slipping state, higher viscosity LCP domains connect the electrodes. In the slipping state, on the other hand, LCP domains do not connect the electrodes and the shear is mainly confined in the lower viscosity DMS domains. The ER effect (electrically induced viscosity increase) originates from the electrically induced slipping to non-slipping transition. In one of the blends, the ER effect occurs only at high shear rate, since this blend is in non-slipping state even under no field if the shear rate is low. Received: 29 April 1997 Accepted: 3 November 1997     

Correct Solutions of Plane Elastic Problems for a Half-Plane

Continuous and integrable solutions and one-to-one relationships between boundary forces and displacements are found through the direct integration of the differential equations of the plane elastic problem for a half-plane with boundary conditions for either forces or displacements or with mixed boundary conditions. The necessary equilibrium conditions for forces and the compatibility conditions for displacements that ensure the correctness of the solutions are formulated     

Plane Collision Problem for Two Identical Elastic Parabolic Bodies—Direct Central Impact

A direct central collision of two identical infinite cylindrical bodies is studied. A nonstationary plane elastic problem is solved. The variable boundary of the contact area is determined. A mixed boundary problem is formulated. Its solution is represented by Fourier series. An infinite system of Volterra equations of the second kind for the unknown expansion coefficients is derived by satisfying boundary conditions. The basic characteristics of the collision process are determined numerically depending on the curvature of the frontal surface of the bodies     

PVDF应力测量技术及在混凝土冲击实验中的应用

介绍了使用PVDF(polyvinylidene fluoride,聚偏二氟乙烯)应力计的应力直接测量技术。在SHPB装置上进行自制PVDF应力计动态压电系数的标定实验,分析了应力集中、横向泊松效应、摩擦效应对PVDF应力计信号及动态压电系数的影响。用PVDF应力计进行了混凝土的冲击压缩实验。利用混凝土前后端面PVDF应力计信号分析了实验过程中混凝土试样的应力均匀性。与应变计直测应变技术相结合得到了混凝土的动态应力-应变关系。